deviation build env

第一步先安裝  windows docker

   https://docs.docker.com/engine/installation/windows/

must have a 64-bit operating system running Windows 7 or higher

Make sure your CPU supports virtualization technology and virtualization support is enabled in BIOS and recognized by Windows.  vt-D or AMD-D

For Windows 7

Run the Microsoft® Hardware-Assisted Virtualization Detection Tool and follow the on-screen instructions.  

Installation

If you have VirtualBox running, you must shut it down before running the installer.

1. Go to the Docker Toolbox page.
2. Click the installer link to download.
• installs executables for the Docker tools inC:\Program Files\Docker Toolbox
• install VirtualBox; or updates any existing installation
• adds a Docker Inc. folder to your program shortcuts
• updates your PATH environment variable

For Windows users, you should run the 'Docker Quickstart Terminal'. All of the following commands will be run inside that window.

First, you need to download the Deviation build environment. From the shell, run:

docker pull deviationtx/deviation-docker

If you are a developer and have already checked out the Deviation GIT source, you can use:

docker create -it -v ~/devo_builds:/release -v <path to git>:/git --name deviation_build deviationtx/deviation-docker

NOTE: the <path to git> should be the directory above where Deviation is checked out. E.g. if Deviation is checked out to ~/git/deviation, <path to git> would be '~/git'

Building Deviation

You can now start the Docker container, and start building Deviation.

To get started run: docker start -i deviation_build

Building the Deviation Manual

The docker image is also capable of building the deviation manual. After creating the Docker container, start docekr and enter the Shell. run:sudo /root/build.py –manual-prereq to install the necessary build environment

  

(右上角的SHELL 按下去)

Next (still from the docker shell), run:cd /git; git clone https://github.com/DeviationTX/deviation-manual

For instance, from within the docker shell and run:cd deviation-manual; make TARGET=devo10 html pdf



ref : http://www.deviationtx.com/wiki/development/docker